Muratec F-320 Operating Instructions Manual page 25

Getting started
Level one function Level two function
2. User Settings 2.Fax Settings
3.Copy Settings
4.Printer Settings*
5.Scanner Settings*
*3: This option appears only if the optional NIC (network interface card) has been installed.
*4: This option appears only if the optional printer controller has been installed. For details see the operating instructions included with the printer controller kit.
1.14
Level three function Summary of setting
01.Scan Parameters You can set the following settings for send fax message.
• Primary document mode
• Primary contrast mode
02.Print Parameters You can set the following settings for receive fax message.
• Reduction rate
• Reduction margin
• Half-page reception
03.Number of Rings Number of rings before your machine answers.
04.Redial Number of times and interval for automatic fax redialing.
05.Dialing Pause Dialing pause length.
06.Memory Tx On/Off setting for Memory transmission.
07.Quick Tx On/Off setting for Quick Memory transmission.
08.TTI Tx On/Off setting for sending your TTI.
09.ECM Mode On/Off setting for ECM mode.
10.Block Junk Fax Reject the fax reception from unauthorized incoming faxes.
11.Security Rx Keep all received fax messages in memory and after print them.
12.Separator Page Partition each received documents by inserting the separator page. Off
13.PIN Mode Prevent unauthorized long-distance calls.
14.DRD Set the ring pattern to use with phone company's Distinctive Ring
service.
1.Scan Parameters You can set the following settings for copying.
• Primary document mode
• Primary contrast mode
2.Print Parameters You can set the following settings for copying.
• Reduction rate
• Reduction margin
• Bypass Tray priority
3 1.TCP/IP Enter the IP Address, Subnet mask and Gate way address.
4 1.Scan Parameters Enter the scanning parameters.
2.Auto Reset Set the time (minutes) for resetting the scan parameters and .
returning to the Fax mode.
Default setting Page
Normal
Normal 4.1
Auto
40 mm 4.3
Off
2 times 4.4
2 times 4.5
1 minute
2 seconds 4.5
On 4.2
On 4.2
On 4.2
On 4.1
Off 3.45
Off 3.42
3.21
Off 3.43
Off 3.22
Fine
4.6
Normal
100%
4.7
24 mm
Off
— —
— —
3 minutes —