Muratec F-320 Operating Instructions Manual page 90

13
The asks which document mode you want each time you use this pro-
LCD
grammable one-touch number.
Document Mode:------
$ $ # #
/ /Enter
14
Press or until the mode you want appears.
Note: For any of the following settings, choosing "---" tells the machine to
use its default setting for this programmable one-touch key.
15
Press . The asks which contrast mode you want each time you use
ENTER LCD
this programmable one-touch number.
Contrast :-------
$ $ # #
/ /Enter
16
Press or until the mode you want appears.
17
Press . The asks if you want the Fax & Copy feature on or off each
ENTER LCD
time you use this programmable one-touch number.
Fax & Copy :---
$ $ # #
/ /Enter
18
Press or until the mode you want appears.
19
Press .
ENTER
20
Press to return your machine to standby mode.
STOP
Fax dialing with programmable one-touch
To dial a fax call using a programmable one-touch number:
1
Set your document in the
ADF
2
Make any necessary adjustments as usual.
3
Press the programmable one-touch key in which you've stored the fax commu-
nication command.
Your fax will perform the operation now, or at whatever time you programmed.
Note: To review the details of each operation, review the instructions for that
operation. See page 3.33 for a list of each operation and where to find it.
.
If you programmed this key to delay its operation, the
** Reserved **
Jan 29 2002 5:17pm
If you programmed this key to perform the operation immediately after you press it,
the shows the number:
LCD
9-1-972-555-4335
A4 Normal
Printing a list of your programmable one-touch keys
You fax machine can print a list of the commands you've stored in your programma-
ble one-touch keys.
The list includes:
(1) each key's one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you've selected
(5) if applicable, the selected call group(s) or F-Code box(es) you've stored in
the key
(6) the individual settings for each key
To print a list of programmable one-touch keys, press
Erasing a programmable one-touch key
1
Press , 3, 4, 2. The shows:
MENU LCD
Select Program No.
57:Delayed
2
Select the programmable one-touch key you want to erase.
Note: You can select the programmable one-touch key by pressing that key
on the control panel.
3
Press . The following two displays will appear alternately:
ENTER
57:Erase P One-Touch
Yes Enter
Important: If you want to quit without erasing the one-touch number
you've selected, press
4
Press to erase the number.
ENTER
To erase another program one-touch number, repeat steps 2–4. Or press
return to standby mode.
Advanced features
shows:
LCD
, 5, 1, 1, 1, .
MENU ENTER
57:Erase P One-Touch
No Cancel
. The fax will return to step 2.
CANCEL
STOP
to
3.41