Muratec F-320 Operating Instructions Manual page 75

Advanced features
12
Use the numeric keypad to enter this box's
password can be up to 20 characters in length and include any combination of
numbers and the * and # characters (but no other non-numerical characters).
Note: You cannot change the type of an existing F-Code box. If you're modi-
fying an existing F-Code box and want to change the box type, you
first must erase the old box, then create a new one.
13
Press to save the password. The
ENTER
Box Type :Bulletin
$ $ # #
/ /Enter
The fax machine is asking which box type you want to assign to this box —
bulletin, security or relay.
Press or until the type of box you want appears.
14
Press .
ENTER
If you chose Bulletin, go on to step 15.
If you chose Security, skip to step 16.
If you chose Relay, skip to step 19.
If you chose Bulletin:
15
The bulletin box has four additional settings:
• Reception protection ("Rx Protect" on the
• Automatic printing of received documents ("Auto Print")
• Overwriting documents ("Overwrite Doc.")
• Erasure of transmitted documents ("Erase Tx Doc.")
Rx Protect — Reception protection tells this box if it's okay to receive
documents from remote locations. Callers can then poll these documents.
Rx Protect
On: Open this box to receive documents from callers.
Off: Do not open this box to receive documents from callers.
Press or until the mode you want appears.
Then press to save the setting and go on to the next one.
ENTER
3.26
- -compatible password. This
ITU T
now shows:
LCD
)
LCD
:Off
$ $ # #
/ /Enter
Auto Print — Automatic printing of received documents tells the fax machine
if it should print a document automatically upon receiving it into this box.
Note: This setting is available only when the reception protection (Rx pro-
tect) setting is set to off (see above).
Auto Print
$ $ # #
/ /Enter
On: Print the document automatically when the box receives it.
Off: Print the document manually, when you want to print it.
Press or until the mode you want appears.
Then press to save the setting and go on to the next one.
ENTER
Overwrite Doc — Overwriting documents tells your machine if it should
overwrite (erase) existing documents when it receives a new one.
Note: This setting is available only when the reception protection setting is
set to off (see Rx Protect above).
Overwrite Doc.
$ $ # #
/ /Enter
On: When your machine receives a new document into this box, it will erase
any documents currently stored in it.
Off: When your machine receives a new document into this box, it will not
erase the documents stored in it. Your machine can store up to 30
documents (each document can include one or more pages) in each box.
Press or until the mode you want appears.
Then press to save the setting and go on to the next one.
ENTER
Erase Tx Doc — Erasure of transmitted documents tells your machine if it
should erase a document from the box after a caller retrieves (polls) the
document.
Erase Tx Doc.
$ $ # #
/ /Enter
On: Your machine erases the document from the box as soon as it sends it. If
you choose "On", this box can be polled only once per document.
Off: Your machine does not erase a document from the box when it's polled.
As long as your machine holds
ment from the box, the document is available indefinitely for polling.
Press or until the mode you want appears.
Press to save the setting. Then skip to step 23.
ENTER
:Off
:Off
:Off
power and you do not erase the docu-
AC