Muratec F-320 Operating Instructions Manual page 74

• Relay box — Receives documents, then relays them to other machines. The
machine that relays the document is called a "hub". Your fax machine can either
send to a hub or it can be a hub.
4 elements of an F-Code box
Each F-Code box has the following four elements:
(1) F-Code box number (01-50)
(2) F-Code box name (up to 16 characters)
(3) F-Code sub-address (up to 20 characters - can include numbers and the * and #
characters only)
(4) . . Code (4 digits)
I D
You will choose the information for each of these elements, and enter it into your
machine. The following steps will walk you through entering and changing that
information.
To create or modify an F-Code box:
1
Keep pen and paper with you as you follow these steps. As you decide on a
sub-address and enter it into your machine, write it down. Remember to:
(1) write down which box goes with which sub-address, (2) write down any
passwords or . . codes you enter, (3) keep these printed records in a safe
I D
place.
2
Press , 3, 5, 1, . The
MENU ENTER
Select F-Code Box
01:No Number Stored
3
Use the numeric keypad to enter the two-digit number (01-50) of the F-Code
box you want to create or modify.
4
Press . What you do next depends on whether you're creating or
ENTER
modifying the F-Code box:
If creating — skip to step 6.
If modifying — the asks you to enter the proper
LCD
03:Set F-Code Box
Enter I.D. Code:****
5
Use the numeric keypad to enter the 4-digit
address and not the - password). Skip to step 7.
ITU T
Note: If you enter an invalid
and aborts this operation.
Note: If you want to modify an existing F-Code box and want to change the
box type, you first must erase the old box, then create a new one.
shows:
LCD
. . code. The
I D LCD
. . code (not the -
I D ITU T
. . code, the fax machine rejects the attempt
I D
6
The machine is now asking you to name this F-Code box. The
03:Box Name;Upper
_
If you do not want to enter or change this F-Code box's name, skip to step 8.
If you do want to enter or change this F-Code box's name, go on to step 7.
7
Enter the name by using the numeric keypad. (If necessary, review "Entering
characters", page 1.12) An F-Code box's name can be up to 16 characters in
length.
8
Press
ENTER
03:Sub-Address No.
_
The fax machine now asks for this F-Code box's sub-address. This is the
numerical identifier you must enter in order to communicate with any remote
F-Code compatible fax.
If you do not want to change an existing sub-address, skip to step 10.
9
Use the numeric keypad to enter the sub-address to identify this F-Code box.
The sub-address can be up to 20 characters in length and include any
combination of numbers and the * and # characters (but no other non-
numeric characters).
Note: No other F-Code box in this machine can have the same sub-address
as the one you enter here.
10
Press
ENTER
Note: If you entered a sub-address already being used by another F-Code
box, the machine beeps and briefly displays:
03:Sub-Address No.
Sub-Address In Use
shows:
The machine now returns you to step 10. Please enter a different
number for your F-Code box's sub-address.
11
Next, the machine asks for your F-Code box's password. This is the password
for - -compatible F-Code fax transactions. The
ITU T
sub-
03:Password
_
Note: You don't need to have a password for the F-Code box. However, using
a password will make your F-Code communication much more secure.
If you do not want to enter or change this box's password, skip to step 14.
to save the box's name and continue. The
to save the sub-address.
Advanced features
shows:
LCD
shows:
LCD
shows:
LCD
3.25