Muratec F-320 Operating Instructions Manual page 76

If you chose Security:
16
The machine asks how long you want to keep a document stored in your
machine's F-Code box. The
LCD
F-Code Doc Hold Time
(00-31) 00 days
17
Use the numeric keypad to enter a two-digit number indicating how many
days (00-31), you want your fax machine to keep received documents in this
F-Code box.
Note: Your fax machine can store incoming documents in F-Code boxes (up
to 30 documents) as long as 31 days, after which it automatically
erases the documents. But if your machine has plenty of memory, you
may want to override the 31-day limit in order to keep the documents
indefinitely. If so, enter 00. If you choose this, you will have to delete
documents manually. (You may want to contact your authorized
Muratec dealer regarding optional memory expansion.)
18
Press to save the settings. Skip to step 23.
ENTER
If you chose Relay:
19
The machine asks for the fax number for the remote unit.
The shows:
LCD
Enter Relay Number
_
20
Enter the fax number using a one-touch key, a speed-dial number or a call
group number. You cannot use the numeric keypad to enter these numbers.
To add each fax number, press
comma, then enter the number. You can specify up to 200 numbers for a
remote unit.
21
Press to save the settings. The
ENTER
Select TTI :Sender
$ $ # #
/ /Enter
The machine asks for the type of
relayed to other callers.
• Sender — Relay the document with sender unit's
• Both — Relay the document with both the sender unit's
• Yours — Relay the document with your
Press or until the mode you want appears.
shows:
between each one to insert a
BROADCAST
shows:
LCD
you want to appear on the faxes that are
TTI
(don't send your
TTI
and your
TTI
instead of the sender unit's.
TTI
22
Press to save the settings. The
ENTER
Auto Print
On: Print the document automatically when it's received.
Off: The machine does not print it, but only relays it to the other machine.
Press or until the mode you want appears.
Then press
ENTER
23
The machine asks for your F-Code box's four-digit security
the . . code for the box's security, which you use to (1) print a document any
I D
remote F-Code-compatible fax sends to this F-Code box or (2) you enter before
you can make any changes to this F-Code box.
03:Set F-Code Box
Enter I.D. Code:0000
If you do not want to change the
24
Decide on a four-digit
Write it down, and put it in a safe place.
Important: Do not use 0000 as an
25
Use the numeric keypad to enter the four-digit
Important: After completing this step, you must know this code to print
documents sent to this F-Code box. Be sure to write it down.
26
Press to save the F-Code box information.
ENTER
To create or modify another F-Code box, repeat steps 3-26.
To finish, press
STOP
).
TTI
.
TTI
shows:
LCD
:Off
$ $ # #
/ /Enter
to save the settings and go on to step 24.
. . code, skip to step 27.
I D
. . code (0001-9999) for this F-Code box.
I D
. . code.
I D
. . code for this F-Code box.
I D
.
Advanced features
. . code. This is
I D
3.27