Muratec F-300 Quick Demo Manual

>
11.
Setting the Transmission
Confirmation Report Default to "On"
a. Press [Menu].
b. Select [Other Settings] and press [Enter].
c. Select [Journal & Reports] and press [Enter].
d. Select [Report AutoPrint].
e. Press [Enter].
f. Use the arrow keys to select [On].
g. Press [Enter].
h. Press the [Reset] key to exit and return to standby mode.
>
12. Printing a List of Speed Dial Entries
a. Press [Menu].
b. Select [Print] and press [Enter].
c. Select [List Print] and press [Enter].
d. Select [Speed Dial] and press [Enter].
e. The list will automatically print and return to standby mode.
>
13 .
Printing a List of Macro Commands
a. Press [Menu].
b. Select [Print] and press [Enter].
c. Select [List Print] and press [Enter].
d. Scroll down and select [Macros List] and press [Enter].
e. The list will automatically print and return to standby mode.
>
Additional features/notes
Muratec America, Inc.
3301 East Plano Parkway, Suite 100, Plano, Texas 75074
(469) 429-3300 • www.muratec.com
MK3130
>
F-300 AND
MFX-1330
Quick Demo Guide
This Quick Demo Guide serves as a simple
reference for demonstrating significant
features of the F-300 and MFX-1330.
The '*' symbol denotes features specific to
the MFX-1330 & MFX-1330D. Visit and
log-in to the Muratec Web Center at
www.muratec.com/webcenter for additional
product information.
F-300
MFX-1330