Muratec F-320 Operating Instructions Manual page 30

5
Use the numeric keypad to enter the correct date and time, using a
format for the date and 24-hour format for the time. For instance, to set 2:30
on January 27, 2002, press 0 1 2 7 0 2 1 4 3 0, which results in:
PM
Enter Time
01/27 '02 14:30
Note: Your fax machine automatically inserts the spaces and date-slash. All
you have to do is enter the digits.
To change a digit, press to move the cursor left, or
Then enter the correct digit.
6
Press to save the clock setting and continue.
ENTER
7
The now asks if you want to set the calendar/clock to automatically
LCD
recognize daylight saving time (
Daylight Saving :Off
$ $ # #
/ /Enter
When the setting is ON, your machine automatically recognizes
the appropriate switchover Sundays each year.
When the setting is OFF, no automatic change will occur.
8
Press or until the mode you want appears.
9
Press to save the setting and continue.
ENTER
10
The now shows the machine's current reception mode.
LCD
Fax Ready
$ $ # #
/ /Enter
11
For now, select Fax Ready. (This setting can always be changed. We'll discuss
reception modes further on pages 2.9–2.10.)
12
Press to save the setting and continue.
ENTER
13
The now asks you to enter the type of dialing needed for the fax machine,
LCD
either tone or pulse:
Dialing Type :Tone
$ $ # #
/ /Enter
14
Press or until the mode you want appears.
15
Press to save the setting and continue.
ENTER
MMDDYY
to move it right.
).
DST
DST
16
The now asks you to enter your fax number as you want it to appear on
LCD
other fax machines' displays or printouts. The fax industry term for this
number is Subscriber
Your Fax Number
17
Use the numeric keypad to enter the fax number. To insert a dash, as shown
here, press
ters (numbers and dashes).
Your Fax Number
972-555-5525_
Note: If you make a mistake, press
To change just one number, press
Press
rectly.
18
Press
ENTER
at 2 on
AM
19
The now asks you to enter the name you want to appear at the top of
LCD
faxes you send. You can enter three of TTI. The name may be up to 22 charac-
ters in length.
TTI 1
_
20
Use the numeric keypad to enter characters for TTI 1. (Refer to "Entering
characters" on page 1.12.)
Note: If you make a mistake, press
To change just one character in the name, move the cursor by cursor
key. Press
correctly.
21
Press
ENTER
TTI 2
_
If you do not want to enter other TTI, press
22
Use the numeric keypad to enter characters for TTI 2.
.
ID
/ . once. The number may contain up to 20 charac-
PAUSE DIAL OPT
to erase to the left.
CANCEL
to move left, or
to erase the number. Then re-enter the fax number cor-
CANCEL
to save the number and continue.
;Upper
to erase to the left.
CANCEL
to erase the character. Then re-enter the character
CANCEL
. The will show:
LCD
;Upper
ENTER
Getting started
to move right.
twice and skip to step 26.
1.19