Easystart (Initial Settings); Getting Started; Clearing Stored Settings; Entering Initial Settings - Muratec F-320 Operating Instructions Manual

Getting started

EasyStart (Initial settings)

EasyStart software is already installed on your Muratec fax machine. It guides you
through the process of entering the following settings. These settings you make here
can always be changed later.
• Language on the LCD and Lists
• Current Day and Time
• Automatically Daylight saving time
• Fax reception mode
• Phone dialing type
• Subscriber ID (your fax phone number)
• Your TTI (your name)
• TTI select
• Time for the machine to enter the sleep mode
Getting started
Determine the following before you go any further:
1
The type of dialing your telephone system requires — Choose either Tone
or Pulse (rotary) dialing.
2
The name and fax number you want to appear on your faxes —
Every fax page you send arrives at the receiving machine with a single line of
text at the very top of the page. This text lists a name (called the Transmit
Terminal Identifier ( )) and a fax number (called the Subscriber
TTI
The cannot be longer than 22 characters.
TTI
1.18

Clearing stored settings

Before using EasyStart, clear your machine's built-in user data memory. This
ensures the memory will hold only your settings.
Important: After you use EasyStart, do not clear the memory again unless an
authorized technician asks you to do so.
To clear the machine's memory:
1
Press
MENU
following two displays will appear alternately:
Clear User Settings
Yes
Note: If you don't want to clear the memory, just press
2
If you do want to clear the memory, press

Entering initial settings

Important: If you press
standby mode (its normal condition). But it will keep the settings you
saved by pressing
1
To start EasyStart software, press
).
ID Language
2
Press or
3
Press
ENTER
4
The now shows the current calendar/clock setting, with a cursor appear-
LCD
ing on the first digit.
Enter Time
, *, 0, 2. The now asks if you want to clear the memory. The
LCD
Clear User Settings
Enter No
ENTER
during EasyStart, your fax machine returns to
STOP
as described in these instructions.
ENTER
, 9,
MENU ENTER
:English
$ $ # #
/ /Enter
until the language you want appears.
to save the language setting and continue EasyStart.
01/01 '01 00:00
Cancel
.
CANCEL
.
. The shows:
LCD