Muratec F-320 Operating Instructions Manual page 106

Bypass Tray priority
If you set the same sized paper to both the paper cassette and bypass tray, and this
mode is turned to on, the machine gives priority to use the paper which is set on the
bypass tray than the paper in the cassette.
To adjust the copy print settings
Default setting: Copy reduction rate: 100%, Margin: 24 mm, Bypass tray priority: Off
1
Press , 2, 3, 2, . The
MENU ENTER
ing:
Prt Reduc.Rate :100%
$ $ # #
/ /Enter
2
Press or until the reduction setting you want appears.
3
Press to save the setting. The
ENTER
Margin
(00-85) 24 mm
4
Use the numeric keypad to enter the print margin you want. If necessary,
press or to move the cursor.
5
Press to save the setting. The
ENTER
tray priority:
Bypass Priority :Off
$ $ # #
/ /Enter
6
Press or until the setting you want appears.
7
Press to save the setting.
ENTER
shows the current reduction rate for copy-
LCD
shows the current print margin:
LCD
shows the current setting for bypass
LCD
Changing the default settings
4.7