Programming Printouts - Muratec F-320 Operating Instructions Manual

10
Press . The now asks if you want to make additional settings for
ENTER LCD
this programmable one-touch number.
Option :Off
$ $ # #
/ /Enter
If you do not want to make additional settings, select "Off" and press
Then skip to step 12.
If you do want to make additional settings, press
.
ENTER
11
Follow steps 13–25 on page 3.34.
Note: "Memory Tx", "Report" and "Cover Page" will not appear when you
program batch transmission.
12
Press to return your machine to standby mode.
STOP

Programming printouts

You can program the operation for printing following lists into programmable one-
touch keys:
• Function list (page 1.13)
• User settings list (page 4.10)
• Activity journal (page 3.20)
• Delayed commands list (page 2.7)
• One-touch list (page 3.2)
• Speed-dial list (page 3.4)
• Programmable one-touch list (page 3.41)
• Group list (page 3.7)
• Blocked numbers list (page 3.46)
• Sample cover page (page 3.22)
• Department time list (page 3.48)
• List of F-Code boxes (page 3.28)
• List of documents stored in F-Code boxes (page 3.28)
• Batch box list (page 3.12)
• List of stored batch documents (page 3.12)
• Macros list (page 3.18)
To program a programmable one-touch key to print a list:
.
ENTER
to select "On" and press
1
Press , 3, 4, 1, . The
MENU ENTER LCD
touch number available:
Select Program No.
58:No Number Stored
2
Press or to select the programmable one-touch key in which you want to
store or change.
If changing a previously stored command, skip to step 5.
Note: You can select the one-touch key by pressing that key on the control
panel.
Note: If your previous command for this key was a printing lists operation,
and you want to keep this key programmed for a printing lists opera-
tion, use these instructions to make changes. But if the previous
command for this key was a fax communication command or a docu-
ment storage operation, you must first erase the stored command
before programming the new one.
3
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
$ $ # #
/ /Enter
4
Press or until "List Print" appears.
Type :List Print
$ $ # #
/ /Enter
5
Press . The asks which list you want to program into the program-
ENTER LCD
mable one-touch:
58:Machine Settings
$ $ # #
/ /Enter
6
Press or until the list you want appears.
7
Press .
ENTER
8
Press to return your machine to standby mode.
STOP
Advanced features
shows the first empty programmable one-
3.39