Erasing An Empty F-Code Box; Printing A List Of Your F-Code Boxes; Printing A List Of Documents Stored In Your F-Code Boxes - Muratec MFX-1500 Operating Instructions Manual

Erasing an empty F-Code box

Important: You can erase only an empty F-Code box. If a box is holding any
documents, you must first clear each document. If the box is a bulletin
box, you can delete documents (see "Erasing a document stored in a
bulletin box," page 2.57); if the box is a security box, you can clear the
box by printing the documents it holds (see page 2.58).
To erase an empty F-Code box:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
Press , , 5, . The display shows:
2.
PROGRAM P ENTER
Select F-Code Box
01:No Number Stored
If this is the box you want to erase, skip to step 5. (However, our examples
from here will refer to box 03 rather than box 01.)
3. Use the numeric keypad to enter the two-digit identifier number (01–50) of the
F-Code box you wish to erase. Here, we've pressed 0, 3 and see:
Select F-Code Box
03:Muratec UK
4. If you change your mind and wish to erase a different F-Code box, just use the
numeric keypad to enter the desired box's two-digit identifier number before
going on to step 5.
Press . If the F-Code box is empty, the display shows:
5.
ENTER
03:Erase F-Code Box
F-Code Passcode:****
If you have not set the passcode for your F-Code box, skip to step 8.
Important: If you select a F-Code box which is not empty, the machine
beeps and, before returning to step 3, briefly displays:
Select F-Code Box
Box In Use
Review the Important item before step 1 (above).
6. Use the numeric keypad to enter the proper four-digit passcode.
Here, we've entered 2345:
03:Erase F-Code Box
F-Code Passcode:2345
/ to change to Fax mode.
FAX
Select F-Code Box
or
01:Murata Machinery
Press .
7.
ENTER
If you entered an invalid passcode in step 6, the fax machine will reject the
attempt and abort this operation.
If you entered the correct passcode in step 6, the display will show:
03:Erase F-Code Box
Check Program/Enter
Note: If you want to quit without erasing the F-Code box you've selected,
press . The fax will return to step 2.
PROGRAM
Note: If you want to quit without erasing any F-Code box, press
machine will return to standby mode.
8. Press to erase the F-Code box.
ENTER
Erase F-Code Box
** Complete **
To erase another F-Code box, repeat steps 3–8.
To finish, press .
STOP

Printing a list of your F-Code boxes

You can easily print a list of your F-Code boxes. The list includes each box's
identifier number, box name, sub-address, password, box type and each box's setting.
To print the list, change to Fax mode then press
Printing a list of documents stored in
your F-Code boxes
You can print a list of all the documents stored in your machine's F-Code boxes. This
will provide you with each document's file number. Keep in mind, however:
• If using the F-Code box as a bulletin box, you will need to know a file's number
and the box's passcode to erase or print it on your machine.
• If using the F-Code box as a security box, you need to know the box's passcode to
print all documents in (thus erasing them from) — the box.
To print the list, change to Fax mode then press
Beyond the basics
. The
STOP
, , 2, .
PROGRAM P ENTER
, , 3, .
PROGRAM P ENTER
2.55