Muratec F-320 Operating Instructions Manual page 40

3
If you want to cancel the command shown, press
displays will appear alternately:
C01:5552009
Yes Cancel
4
To go ahead with canceling the command, press
view other delayed commands.
To keep this command but to continue reviewing stored commands, press
. Go back to step 2.
BACK
To keep this command and stop reviewing commands, press
your machine to standby mode.
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press . /
COMM CANCEL CONFIRM
2
Press or to scroll through currently stored broadcast command.
C01:Broadcast
$ $ # #
" "
/ / /Cancel
3
When the command you want to cancel shown, skip to step 6.
If you want to review individual numbers within this broadcast, go on to step
4 without pressing .
CANCEL
4
To review individual numbers within this broadcast, press
number. The shows:
LCD
9-5550388
$ $ # #
! !
/ / /Cancel
5
Press or until you find the number you want to cancel.
6
Press , . The next number will appear.
CANCEL CANCEL
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling other command, press
If you don't want to cancel any more numbers, press
returns to standby mode.
. The following two
CANCEL
C01:5552009
No Back
. Go back to step 2 to
CANCEL
STOP
..
to see the first
. The machine
STOP
Printing a delayed command list
Your machine can print a command list which tells you:
• The command's identification number
• The phone number, or "remote location"
• The start time (this appears in a
• A "note" telling if the command is a polling or F-Code operation (see pages 3.14
for more on polling and 3.24–3.32 for more on F-Code communication).
To print a delayed command list, press
to return
Printing a stored document
Your fax machine can print out each document stored for delayed transmission.
To print a stored document, you'll need to know the document's command number,
which you can get by either reviewing the commands or printing a delayed com-
mand list (see above).
1
Press
MENU
Comm. Stored Doc.
Command No.
2
Use the numeric keypad to enter the command's identification number, 1–99.
3
Press
ENTER
View the result of fax transaction
You can see 70 most recent fax transactions and result of each transactions with the
following information.
• Assigned number, starting each day at 001
• Remote location called (The destination name)
• Starting date and time
• Result of the call — If preceded by an asterisk (*), this signifies an
nication. If preceded by a pound (#), this signifies communication was via the
highspeed V.34 modem.
Note: Your machine's
to Rx.
.
, : format)
DD HH MM
, 5, 1, 0, 4
MENU
, 4, 3, 5 . The shows:
ENTER LCD
:_
. Your fax machine will print a copy of the stored document.
shortens the word Transmission to Tx and the Reception
LCD
Basic operation
.
ENTER
commu-
ECM
2.7