Muratec F-320 Operating Instructions Manual page 118

What you see on the
LCD
No Number Stored
No Passcode
No PIN Number
No Report
No Toner Cartridge
Not Allowed in Macro
Open Top Cover
Please Remove Paper
Open 1st Side Cover
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover
Reset Document
What it means/What to do
You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another
number or dial a phone number directly from the
numeric keypad.
You tried to program a security feature (see
page 3.42), but there's no protection passcode
stored in your fax machine. Store a protection
passcode in your machine, then retry again.
You selected "Mode1" in the mask feature
PIN
and tried to call an autodialer number in which
no PIN has been entered, or to call using
numeric keypad without . Enter a
PIN
try again.
You requested an activity journal or confirma-
tion report, but your fax machine has no record
of any fax jobs having occurred.
The toner cartridge is missing or has not been
properly installed in your fax machine. Please
properly install the toner cartridge.
During macro registration, you pressed the key
which cannot be registered in Macro, such as
Monitor/Call key or Security Reception key.
The paper is jammed in your fax machine.
Open the cover indicated on the LCD, and
remove the jammed paper carefully.
Either your document wasn't inserted correctly,
or the fax to which you're sending can't handle
the document's page length. Reset the page and
try again.
What you see on the
Please Call Service
Please Supply Paper
Please Wait
Polling In Use
, then
PIN
Printer In Use
Protect Doc. Stored
REPLACE DRUM SOON
REPLACE DRUM UNIT
PRINTER NOT USABLE
Scanner In Use
What it means/What to do
LCD
The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
The paper cassette or bypass tray is out of
paper. Supply paper to the cassette and/or the
bypass tray.
Your fax machine's printer is either warming up
or busy. Please wait until the fax is finished
printing and then re-try your command or opera-
tion.
You tried to store the polling document in your
fax machine, where one already had been
stored. Wait for the fax to complete the regular
polling operation or delete the stored document,
then try again.
The command you're trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
A received document was in your fax's memory
when you tried to turn off the security reception
passcode. Print the received document from your
fax's memory, then retry the desired operation.
Your drum will need to be replaced soon.
Please contact your authorized Muratec dealer to
purchase a new drum cartridge if you don't
already have one.
Your drum cartridge doesn't work. Your machine
cannot print until it is replaced with a new
drum cartridge. Replace it.
The command you're trying to enter requires the
use of the scanner, which is already in use. Wait
for the fax to complete the scan, then re-try the
desired command.
Just in case ...
5.7