Muratec F-320 Operating Instructions Manual page 26

Level one function Level two function
3. Other Settings 1.Journal & Reports
2.Cover Page
3.Department Code
4.Program One-Touch
5.F-Code Box
6.Batch Tx
7.Scan Box*
8.Internet Fax*
4. Doc. Management 1.Store Document
2.Erase Document
3.Print Document
*4: This option appears only if the optional printer controller has been installed. For details see the operating instructions included with the printer controller kit.
*5: This option appears only if the optional Internet fax kit has been installed. For details see the operating instructions included with the Internet fax kit.
Level three function
1.Journal AutoPrt.
2.Journal Line Up
3.Report AutoPrint
1.Set Cover Page
2.CoverPage Message
1.Set Dept. Protect
2.Set Dept. Code
3.Set Dept. Setting
4.Erase Dp. TimeList
1.Enter P One-Touch
2.Erase P One-Touch
1.Set F-Code Box
2.Erase F-Code Box
1.Set Batch Box
2.Erase Batch Box
4 1.Set Scan Box
2.Erase Scan Box
1.TCP/IP
5
2.MAC Address
3.Default Relay
4.Archive Tx Fax
5.Archive Rx Fax
1.Polling Document
2.F-Code Document
1.Polling Document
2.F-Code Document
3.Batch Document
4.Scan Box Document*
1.Polling Document
2.F-Code Document
3.Batch Document
Summary of setting
Print the Activity journal automatically after 100 transactions.
Change the printing order of the activity journal.
Print the TCR automatically at every transmission.
On/Off setting for sending the Cover page.
Enter your message for the cover page.
Protection for department code settings.
Register the Department code.
On/Off setting for Department code activation.
Clear the total counts of each department code.
Program several operations for a function you frequently use.
This key can reduce several steps to a simple press of a key.
Erase the programming in a programmable one-touch key.
Create the F-Code box.
Erase an empty F-Code box.
Create the Batch box.
Erase an empty batch box.
Create the Scan box.
Erase an empty scan box.
Set the TCP/IP address.
Enter the Media Access Control Address for network card.
Setting of relay box.
Enter the e-mail address for archiving of Tx document.
Enter the e-mail address for archiving of Rx document.
Store the document to be retrieved by other fax machine.
Store the document to be retrieved by other F-Code compatible
fax machine.
Erase stored document for polling transmission.
Erase stored document in the F-Code box.
Erase stored document in the Batch box.
4 Erase stored document in the Scan box.
Print the stored document for polling transmission.
Print the stored document in the F-Code box.
Print the stored document in the Batch box.
Getting started
Default setting Page
Off 3.20
Off 3.20
Off 3.20
Off 3.21
— 3.22
Off 3.48
— 3.47
Off 3.47
— 3.47
— 3.33–3.41
— 3.41
— 3.24–3.27
— 3.31
— 3.11
— 3.13
— —
— —
— —
— —
— —
— —
— —
— 3.14
— 3.28
— 3.14
— 3.29
— 3.13
— —
— 3.14
— 3.29, 3.30
— 3.12
1.15