F-Code Polling - Muratec F-320 Operating Instructions Manual

Advanced features
7
Use the numeric keypad to enter the password.
8
Press . The shows:
ENTER LCD
Enter Fax Number
_
9
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
10
What you do now depends on when you want the transmission to begin.
• To have it begin now, skip to step 13.
• To delay it, go on to step 11.
11
Press . ,
COMM OPTIONS ENTER
Delayed
Enter Time: 15/17:05
12
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
13
Press .
START
If in step 10 you chose an immediate transmission, your fax machine begins dialing.
If you chose a delayed command, the machine shows "Reserved" on the
ing that it has stored the command in memory and will complete it later.

F-Code polling

1
Press . four times and then press
COMM OPTIONS
Enter Sub-Address
_
2
Use the numeric keypad to enter the appropriate sub-address.
Note: If you make a mistake, press
enter the correct number.
3
Press . The shows:
ENTER LCD
Enter Password
_
Note: If this sub-address does not have a password, skip to step 5.
4
Use the numeric keypad to enter the password.
3.32
. The shows:
LCD
.
ENTER
.
ENTER
to erase the character, then
CANCEL
5
Press
ENTER
Enter Fax Number
_
6
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
7
What you do now depends upon when you want the polling to begin.
.
START
• To have it begin now, skip to step 10.
• To delay it, go on to step 8.
8
Press
COMM
Delayed
Enter Time: 15/17:05
9
Use the numeric keypad to enter the day and time when the polling should
begin, then press
10
Press
START
If in step 7 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows "Reserved" on the
it has stored the command in memory and will complete it later.
, indicat-
LCD
. The shows:
LCD
. , . The shows:
OPTIONS ENTER LCD
.
ENTER
.
.
START
, indicating that
LCD