Setting Sleep Mode (Energy Saving Mode); Setting The Paper Source; Adjusting The Machine's Clock; Setting 2-Bin Tray (Option) - Muratec F-320 Operating Instructions Manual

Setting Sleep mode (Energy saving mode)

Default setting: On
Note: All lamps on the control panel will not be off, even when the machine is
LED
in the sleep mode.
If you want to change the Sleep mode to OFF, you can set it here.
1
Press , 2, 1, 0, 5, . The
MENU ENTER
Sleep Mode :On
$ $ # #
/ /Enter
2
Press or until the mode you want appears.
3
Press to save the setting.
ENTER

Setting the paper source

Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
You can choose one of following for each paper source:
"Fax": Select this if you want to use the paper source you selected for fax-
ing and list (or report) printing.
"Copy": Select this if you want to use the paper source you selected for copy-
ing only.
"Fax/Copy": Select this if you want to use the paper source you selected for fax-
ing, list (or report) printing and copying.
"Not Used": Select this if you want to use the paper source you selected for sepa-
rator page (see page 3.21) or PC printing.
Note: PC printing is available only when your machine has the
optional printer controller kit.
1
Press , 2, 1, 0, 8, . The
MENU ENTER
Cassette1 :Fax/Copy
$ $ # #
/ /Enter
2
Press or until the mode you want appears.
3
Press to save the setting. The
ENTER
Bypass Tray:Fax/Copy
$ $ # #
/ /Enter
shows:
LCD
shows:
LCD
shows:
LCD
4
Press or until the mode you want appears.
5
Press to save the setting.
ENTER

Adjusting the machine's clock

You can adjust the machine's clock here.
1
Press , 2, 1, 0, 7, . The
MENU ENTER
Enter Time
01/27 '02 14:30
2
Use the numeric keypad to enter the current date and time to adjust the
clock.
3
Press to save the setting.
ENTER

Setting 2-bin tray (Option)

Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray
You will set where the printed paper emerges in this operation.
Note: This operation will appear only if the optional 2-bin tray has been attached
to your machine.
1
Press , 2, 1, 1, 0, . The
MENU ENTER
2-Bin Tray :Off
$ $ # #
/ /Enter
2
Press or until the mode you want appears.
If you chose On, proceed to step 3.
If you chose Off, skip to step 7.
3
Press . The asks you to select Lower or Upper tray for copy exit.
ENTER LCD
Press or until the tray you want appears.
Copy Exit :Lower
$ $ # #
/ /Enter
Changing the default settings
shows:
LCD
shows:
LCD
4.9