Chain Removal - MV Agusta F4 BRUTALE 750 ORO Workshop Manual

CHAIN REMOVAL

Remove the chain utilising the special tool.
Special tool N. 800095389.
Identify the connecting link.
The core section of the tool should act on the internal
part of the chain.
N.B.
The tool has three functions:
•
As a chain cutter: with a punch mounted
aligned at A.
•
Press fitting of connecting link plate:
with a raised punch aligned at A.
•
As an anvil: with a raised punch aligned
at B.
Pre-assemble the tool as shown in the figure.
F
Align a pin with the central hole of the tool.
Mount the tool onto the chain as shown in the figure
and align the punch on «A».
Operate as shown in the figure, removing both pins
from the connecting link.
Suspension and wheels
- 54 -
A
B