Table of Contents
Advertisement
Remove the screw on both front wheel/fork attach-
ments.
During this operation, it is necessary to
support the wheel.
Open the terminals (1) and remove the wheel with its
spindle.
Front wheel bearing check
With the wheel spindle still mounted to the wheel,
rotate the wheel to check that the bearings are not pit-
ted and rotate with a smooth action. Check also for
axial (A) and/or radial (B) movement. If either condition
is verified, substitute the bearings.
Front wheel bearing substitution
Remove the wheel spindle utilising the special tool as
shown in the figure.
Special tool N. 8000B4412
Suspension and wheels
- 5 -
1
B
A
F
Advertisement
Table of Contents
