Table of Contents
Advertisement
Multifunction display
10 Thermometer
It displays the temperature of the coolant by turning
on a variable number of segments on a graduated
B
scale. When the temperature falls outside the nor-
mal operating range, it may display one of the fol-
lowing information:
- the display shows just one blinking segment; it
means that the temperature is low;
- all segments are on, while the upper segment is
blinking; it means that the temperature is high.
Danger - Attention: in case of high tempe-
rature, stop the motorcycle and check the
cooling liquid level. If liquid must be topped
up, wait for the engine to cool down. Do not
open the cooling liquid filler cap while the
engine is hot. If the indicator lights up even
though the level is correct, not continue to
run and contact an authorised service cen-
tre.
11 Gear display
It displays the currently engaged gear.
"N" stands for "neutral".
12 Speedometer
It displays the speed of the motorbike. It can be
given in kilometres per hour (Km/h) or in miles per
hour (Mph). The full scale measures 350 Km/h (217
Mph).
13 "SPORT" Mode
It puts the injection unit in Sport Mode.
14 "SET" button
Press it to select and set the figures on the display.
15 "OK" button
Press it to confirm the new settings.
16 "TOTAL" odometer:
It displays the total distance covered; from 0 to
999999 (Km or miles)
Trip counter 1, "TRIP 1"
It displays the length of a trip; from 0 to 999.9 (Km
or miles)
Trip counter 2, "TRIP 2"
It displays the length of a trip; from 0 to 999.9 (Km
or miles)
Chronometer
It displays the time measured by the chronometer
17 "HAZARD" button
Press it to turn on the emergency lights.
Maintenance
Maintenance
10
17
- 62 -
12
11
14
15
16
13
Advertisement
Table of Contents
