Pdr; Phe; Php; Pht - AMX MVP-5200i-GB Instruction Manual

Page Commands (Cont.)

@PDR

Set the popup location reset flag. If the flag is set, the popup will return to its default location on show instead of its last drag
location.
Syntax:
Variable:
Example:

@PHE

Set the hide effect for the specified popup page to the named hide effect.
Syntax:
Variable:
Example:

@PHP

Set the hide effect position. Only 1 coordinate is ever needed for an effect; however, the command will specify both. This
command sets the location at which the effect will end at.
Syntax:
Variable:
Example:

@PHT

Set the hide effect time for the specified popup page.
Syntax:
Variable:
Example:

@PPA

Close all popups on a specified page. If the page name is empty, the current page is used. Same as the 'Clear Page' command in
TPDesign4.
Syntax:
Variable:
Example:

@PPF

Deactivate a specific popup page on either a specified page or the current page. If the page name is empty, the current page is
used (see example 2). If the popup page is part of a group, the whole group is deactivated. This command works in the same
way as the 'Hide Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Example 2:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
"'@PDR-<popup page name>;<reset flag>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
reset flag = 1 = Enable reset flag, 0 = Disable reset flag
SEND_COMMAND Panel,"'@PDR-Popup1;1'"
Popup1 will return to its default location when turned On.
"'@PHE-<popup page name>;<hide effect name>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
hide effect name = Refers to the popup effect names being used.
SEND_COMMAND Panel,"'@PHE-Popup1;Slide to Left'"
Sets the Popup1 hide effect name to 'Slide to Left'.
"'@PHP-<popup page name>;<x coordinate>,<y coordinate>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PHP-Popup1;75,0'"
Sets the Popup1 hide effect x-coordinate value to 75 and the y-coordinate value to 0.
"'@PHT-<popup page name>;<hide effect time>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
hide effect time = Given in 1/10ths of a second.
SEND_COMMAND Panel,"'@PHT-Popup1;50'"
Sets the Popup1 hide effect time to 5 seconds.
"'@PPA-<page name>'"
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PPA-Page1'"
Close all pop-ups on Page1.
"'@PPF-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PPF-Popup1;Main'"
SEND_COMMAND Panel,"'@PPF-Popup1'"
Deactivates the popup page 'Popup1' on the current page.
Programming
82