Table of Contents
Advertisement
Programming
Overview
You can program Modero X Series touch panels, using the commands in this section, to perform a wide variety of
operations using Send Commands and variable text commands. A device must first be defined in the NetLinx
programming language with values for the Device: Port: System. In all programming examples - Panel is used in place
of these values and represents all Modero panels).
Verify you are using the latest NetLinx Master and Modero G4 Series firmware, as
well as the latest version of NetLinx Studio and TPDesign4.
Page Commands
Page Commands are case-insensitive.
Page Commands
@APG
@CPG
@DPG
Modero G4 Touch Panels - Configuration and Programming
Add a specific popup page to a specified popup group if it does not already exist. If the new popup is
added to a group which has a popup displayed on the current page along with the new pop-up, the
displayed popup will be hidden and the new popup will be displayed.
Syntax:
"'@APG-<popup page name>;<popup group name>'"
Variables:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Panel,"'@APG-Popup1;Group1'"
Adds the popup page 'Popup1' to the popup group 'Group1'.
Clear all popup pages from specified popup group.
Syntax:
"'@CPG-<popup group name>'"
Variables:
popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Panel,"'@CPG-Group1'"
Clears all popup pages from the popup group 'Group1'.
Delete a specific popup page from specified popup group if it exists.
Syntax:
"'@DPG-<popup page name>;<popup group name>'"
Variables:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Panel,"'@DPG-Popup1;Group1'"
Deletes the popup page 'Popup1' from the popup group 'Group1'.
Programming
55
Advertisement
Table of Contents
