Security Modes; Open - AMX MVP-5200i-GB Instruction Manual

Security Modes

The Wireless Settings page has two buttons: Simple and Enterprise. Pressing the Simple button opens the Wireless Security: Simple
Mode popup window (FIG. 61), which offers wireless security options suitable for most home and office environments such as Open
(page 57), WEP (page 58), and WPA-PSK (page 59). For more secure options, such as for corporate environments, the Wireless
Security: Enterprise Mode popup window (FIG. 62) offers EAP-LEAP (page 60), EAP-FAST (page 61), EAP-PEAP (page 61), EAP-TTLS
(page 62), and EAP-TLS (page 63).
Wireless Security: Simple Mode
FIG. 61
Wireless Security: Enterprise Mode
FIG. 62

Open

In the Wireless Security: Simple Mode popup window (FIG. 61), press the Security Type field to select Open. Open security does not
utilize any encryption methodology, but requires an SSID (alpha-numeric) entry. This entry must match the Network Name (SSID)
entry of the target AP so the panel knows what device it is using to communicate with the network.
Open Settings
SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name
Save/Cancel:
Refer to the Conf iguring Wireless Network Access section on page 29 and the Using the Site Survey Tool section on page 30 for
further details on these security options.
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the
panel is permitted to join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• If this field is left blank, the panel will attempt to connect to the first available AP.
• Save - store the new security information, apply changes, and return to the previous page.
• Cancel - discard changes and return to the previous page.
Protected Setup Pages
57