Panel Information Page - AMX NXD-1200V Operation/Reference Manual

Firmware Pages and Descriptions
Project Information Page Elements (Cont.)
Job Name:
Sales Order:
Purchase Order:
Build Number:
Creation Date:
Revision Date:
Last Save Date:
Blink Rate:
Job Comments:

Panel Information Page

The Panel Information page (FIG. 85) centers around Modero panel properties such as: resolution used, on-board
memory, firmware, address/channel information, and string information.
FIG. 85 Panel Information page (takes its' information from the touch panel)
The elements of the Panel Information page are described in the table below:
Panel Information Page Elements
Back:
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
Panel Type:
Firmware Version:
Setup Port:
High Port:
High Address:
High Channel:
High Level:
Serial Number:
Setup Pages Version:
Screen Width:
84
Displays the job name.
Displays the sales order information.
Displays the purchase order information.
Displays the build number information of the TPD4 software used to create the project file.
Displays the project creation date.
Displays the last revision date for the project.
Displays the last date the project was saved.
Displays the feedback blink rate (10th of second).
Displays any comments associated to the job. These comments are taken from the TPD4
project file.
Returns you to the previously active touch panel page.
the panel's connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master (requiring a username and password).
Displays the model of the Modero panel being used.
Displays the G4 firmware version being used by the panel.
• Verify you have the latest version from www.amx.com.
Displays the setup port information/value being used by the panel.
Displays the high port (port count) value for the panel.
Displays the high address (address count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the specific serial number value assigned to the panel.
Displays the type and version of the Setup pages being used by the panel.
Displays the pixel width being used to display the incoming video signal on the Modero panel.
• Maximum available screen width on 12" panels is 800 pixels.
This information is retrieved from
the Modero panel
NXD/T-1200V Wall/Flush Mount Touch Panel