Table of Contents
Advertisement
SIP Commands - Master to Panel (Cont.)
?PHN-LINESTATE
^PHN-PRIVACY
?PHN-PRIVACY
^PHN-REDIAL
^PHN-TRANSFER
SIP Setup Commands
The following table lists and describes SIP setup commands.
NOTE: Using any of these commands causes the current user to go offline.
SIP Commands - Setup Commands
^PHN-SETUP-DOMAIN
^PHN-SETUP-DTMFDURATION
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Get SIP linestate command - Queries the state of each of the connections used by the SIP device.
The panel responds with the ^PHN-LINESTATE message.
• Syntax:
"'?PHN-LINESTATE'"
• Example:
SEND_COMMAND Panel,"'?PHN-LINESTATE'"
Get the current line states.
SIP set privacy state command - Enables or disables the privacy feature on the phone (do not disturb).
• Syntax:
"'^PHN-PRIVACY,<state>'"
• Variable:
state = 0 (Disable) or 1 (Enable)
• Example:
SEND_COMMAND Panel,"'^PHN-PRIVACY,1'"
Enables the privacy feature.
Get SIP privacy state command - Queries the state of the privacy feature.
The panel responds with the ^PHN-PRIVACY, <state> message.
• Syntax:
"'?PHN-PRIVACY'"
• Example:
SEND_COMMAND Panel,"'?PHN-PRIVACY'"
Get the current SIP privacy status.
SIP call redial command - Redials the last number.
• Syntax:
"'^PHN-REDIAL'"
• Example:
SEND_COMMAND Panel,"'^PHN-REDIAL'"
Redial the last number.
SIP call transfer message - Transfers the call to the provided number.
• Syntax:
"'^PHN-TRANSFER,<connection id>,<number>'"
• Variables:
connection id: The identifying number of the connection
number: The number to which you want to transfer the call.
• Example:
SEND_COMMAND Panel,"'^PHN-TRANSFER,1,2125551000'"
Transfer call with ID 1 to 2125551000.
Sets the realm for authentication.
Syntax:
"'^PHN-SETUP-DOMAIN,<domain>'"
• Variable:
domain = The realm used for authentication
• Example:
SEND_COMMAND Panel,"'^PHN-SETUP-DOMAIN,asterisk'"
Set the duration of SIP DTMF tones command - Set the duration of DTMF tones generated by the panel
for a SIP connection.
• Syntax:
"'^PHN-SETUP-DTMFDURATION,<duration>'"
• Variables:
duration: The duration in ms of DTMF tones generated by the panel for a SIP connection. Valid range
is 100ms (default) to 3000ms.
• Example
SEND_COMMAND Panel,"'^PHN-SETUP-DTMFDURATION,500'"
Set the duration of DTMF tones generated for SIP to 500ms.
Programming
122
Advertisement
Table of Contents
