Phn-Setup-Domain; Phn-Setup-Enable; Phn-Setup-Password; Phn-Setup-Port - AMX MVP-7500 Operation/Reference Manual

SIP Commands (Cont.)

?PHN-PRIVACY

Queries the state
of the privacy
feature.

^PHN-REDIAL

Redials the last
number.
^PHN-
TRANSFER
Transfers the call
to the provided
number.
The following table lists and describes SIP setup commands. Using any of these commands causes the current user to go
offline.
SIP Setup Commands
^PHN-SETUP-
DOMAIN
Sets the realm for
authentication.
^PHN-SETUP-
ENABLE
Registers a new
user
^PHN-SETUP-
PASSWORD
Sets the user
password for the
proxy server.
^PHN-SETUP-
PORT
Sets the port
number for the
proxy server.
^PHN-SETUP-
PROXYADDR
Sets the IP
address for the
proxy server.
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
The panel responds with the ^PHN-PRIVACY, <state> message.
Syntax:
"'?PHN-PRIVACY'"
Example:
SEND_COMMAND Panel,"'?PHN-PRIVACY'"
Syntax:
"'^PHN-REDIAL'"
Example:
SEND_COMMAND Panel,"'^PHN-REDIAL'"
Syntax:
"'^PHN-TRANSFER, <connection id>, <number>'"
Variable:
connection id = The identifying number of the connection
number = The number to which you want to transfer the call.
Example:
SEND_COMMAND Panel,"'^PHN-TRANSFER, 1, 2125551000'"
Syntax:
"'^PHN-SETUP-DOMAIN, <domain>'"
Variable:
domain = The realm used for authentication
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-DOMAIN, asterisk'"
Once the configuration has been updated, the ENABLE command should be run to
re-register the new user.
Syntax:

"'^PHN-SETUP-ENABLE'"

Syntax:
"'^PHN-SETUP-PASSWORD, <password>'"
Variable:
password = The password for the user name
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PASSWORD, 6003'"
Syntax:
"'^PHN-SETUP-PORT, <port>'"
Variable:
port = The port for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PORT, 5060'"
Syntax:
"'^PHN-SETUP-PROXYADDR, <IP>'"
Variable:
IP = The IP address for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PROXYADDR, 192.168.223.111'"
Programming
153