Tire Pressure Monitoring System (If So Equipped) - Mitsubishi MIRAGE Service Manual

Tire pressure monitoring system (if so equipped)

Put the operation mode in OFF or ACC.
 Indicator is turned OFF.
Tire pressure monitoring
system
(if so equipped)
5
The tire pressure monitoring system uses tire
inflation pressure sensors (A) on the wheels
to monitor the tire inflation pressures. The
system only indicates when a tire is signifi-
cantly under-inflated.
5-56 Features and controls
WARNING
 The compact spare wheel (if so equipped)
does not have a tire inflation pressure sen-
sor.
When the spare tire is used, the tire pres-
sure monitoring system will not work
properly.
N00530201553
See an authorized Mitsubishi Motors
dealer as soon as possible to replace or
repair the original tire.
NOTE
 The tire pressure monitoring system is not a
substitute for regularly checking tire infla-
tion pressures.
Be sure to check the tire inflation pressures
as described in "Tires" on page 9-12.
 The tire inflation pressure sensor (A) is
installed in the illustrated location.
• On vehicles with Type 1 sensor which has
the metallic air valve (B), replace grommet
and washer (C) with a new one when the
tire is replaced.
• On vehicles with Type 2 sensor which has
the rubber air valve (D), replace rubber air
valve (D) with a new one when the tire is
replaced.
I n f o r ma t i o n P r o v i d e d b y :
NOTE
For details, please contact your authorized
Mitsubishi Motors dealer.
Type 1
Type 2