Own The Road; Cruise Control / Adaptive Cruise Control (If Equipped); Drive Mode; Paddle Shifters (Gt Only) - Mitsubishi Outlander 2018 Owner's Handbook Manual

OWN THE ROAD

6

PADDLE SHIFTERS (GT ONLY)

CRUISE CONTROL / ADAPTIVE CRUISE CONTROL (IF EQUIPPED)

B
A
C
D
E
TO SET A CRUISING SPEED
1. Press and the "ACC" (if equipped) or "CRUISE" indicators will appear in
D
the Multi-information Display.
2. Accelerate or decelerate to your desired speed (above 25 mph). Press
remove your foot from the accelerator pedal.
TO ACCELERATE OR DECELERATE SPEED
Push up to increase set cruising speed.
B
Push down to decrease set cruising speed.
C
TO CANCEL THE CRUISING SPEED
Press or press the brake pedal, or press
A
Simply upshift or downshift with a tap of your
fingers – without moving your hands from the
steering wheel.
You can return to the "D" operation by pulling
the + (SHIFT UP) side paddle shifter rearwards
(toward the driver) and holding for over
2 seconds.
- CANCEL: To deactivate the ACC or cruise control.
A
- RES + : To increase the set speed or resume control
B
after cancelling the ACC or cruise control function.
C - SET – : To set the desired speed and to reduce the
set speed.
- ON/OFF: To turn cruise control ON or OFF.
D
- ACC DISTANCE SWITCH: Used to set or change the
E
following distance between your vehicle and the
vehicle in front of you.
.
D
DRIVE MODE SELECTOR (IF EQUIPPED)
The drive mode can be switched by pressing the drive mode button
while the ignition switch is in the ON position.
PRESSING THE BUTTON WILL CHANGE THE DRIVE MODE IN ORDER TO:
4WD: 4WD ECO, 4WD AUTO, 4WD LOCK
S-AWC: AWC ECO, NORMAL, SNOW, LOCK
and
C