Function Key Programming - Sam4s ER-180T Series Operation And Programming Manual

Function Key Programming

Function keys can be defined with an 8 letter name, which is printed on the
customer receipt with the default retained for reporting. In addition there is a
status which controls the functionality. The following outlines all the settings.
Function key Name – By Alpha Keys
Insert the key stamped C and turn to the PGM position
•
Enter the function code shown below and press the SUBTOTAL key
•
60034
Currency
60037
+%
60043
R.A.
60046
CHARGE
The display shows
•
Press the number key 1,2,3, or 4 times to select the required letter.
•
The key press count
Wait until the letter count has increased
•
Up to 8 letters can be printed. Bold, Caps, and Back can also be selected.
Press the SUBTOTAL key and repeat for further items if required
•
To finish press the CASH/TEND key and return to the REG position
•
6 0
Press up to 8 letters using the alpha keyboard
Function key Name – By Alpha Code Entry
Insert the key stamped C and turn to the PGM position
•
Enter 80 and press the SUBTOTAL key
•
Enter 3 digit letter code
•
Press the CASH/TEND key and return to the REG position
•
3 digit 3 digit
code code
60035
60030
60044
60048
which is Func No–Letter Count–Key Press Count
034-00-0
will increase per letter
E.g. 001-00-1
0 x
7 8 9
Space ABC DEF
4 5 6
GHI JKL MNO
1 2 3
PQRS TUV WXYZ
0 00 .
Bold Caps Back
for up to 8 letters, and press Key to set
(see appendix a)
3 digit
Etc up to 8 letters
code
60036
-
60041
RETURN
60045
P.O.
60047
CASH / TEND
and select the next letter
E.g. 001-01-0
SUBTOTAL
x
SUBTOTAL
CASH / TEND
0
8
Key to
be set
-%
NO SALE
CHEQUE
SUBTOTAL
I.e.
(=)
SUBTOTAL
CASH / TEND
(=)
Program Mode • • • • 57