Turning On The Chime Signalization By Manager; Zones Bypassing By Manager; Engineer Access - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/16/32/99 Series – User Operation Manual

5.4 Turning on the Chime signalization by Manager

Attention: This menu is available for ECLIPSE 8 control panel only.
The Chime signalization is a sound signal from the keyboards when opening an entry/exit
type zone. The option can be enabled or disabled by the manager. By default, the Chime
signalization is ENABLED.
In text menus to enable the Chime go to menu "4. SETTINGS – 4. Chime".
In address menus follow the sequence:
Address /
4. CHIME
Manager Code
See item 4.3 for the visualization according the used keyboard.

5.5 Zones bypassing by Manager

Bypassing zones is done in manages menu "2. ZONE BYPASS" (Address 04) or by
pushing the BYPASS button, after a valid user code has been entered:
OR
Address /
2. ZONE BYPASS
Manager Zone Manager code Zone
code Numbers Numbers
Note: Bypassing zones with LED 8 and LED 16A keyboards is possible only by entering
address 04, because these keyboards do not have a BYPASS fast button.
See item 4.4 for the visualization according the used keyboard.
To check the bypassed zones in the system, see item 3.8.
Note: Certain Managers may not be permitted to bypass zones. In order for users to
bypass zones option "BYPASS ENB" must be enabled in manager's menu 1. USERS –
xx. User – 02. Options (Address 06 – option 3).

5.6 Engineer Access

In this menu the manager can enable/disable the engineer access (access to the engineer
programming menus). In text menus set the Engineer Access go to menu "4. SETTINGS -
3. ENGINEER ACCESS".
In address menus follow the sequence:
Address
Manager code
By default, engineer access is ENABLED.
28