Table of Contents
Advertisement
Printing Data
Starting a Printing Operation
• When using a roll media, rewind the media by
hand before printing so that it is not loose.When
the roll media has not been rewound tightly, it may
cause the image quality to deteriorate.
• When the same data is printed, the color may
differ if print conditions are changed, including the
resolution, pass, scanning speed, and printing
direction. Check the effects before printing.
Setting a Media (
1
Checking the Heater Temperature
2
Press the
3
• If the heater temperature has not reached the
setting
value,
"TEMPERATURE CONTROL" is displayed.
Even if it has not reached, you can move to
Remote when pressing the [ENTER] key.
• The screen changes to Remote, and data can be
received from the PC.
Transmit data to be printed from the PC.
4
• For the method of data transmission, see the
instruction manual for the output software.
Resolution
REMOTE <Setup 1>
300x600 VD
32P Bi Hi / R / MP
MAPS information
MP : MAPS 機能有効
Nozzle recovery information
R: Nozzle recovery is performed.
Scanning speed
Nr : Standard speed/ Hi : Double speed
Scan direction
Uni :Unidirectional / Bi : Bidirectional
Number of passes
2-22
P.2-4)
(REMOTE) key in LOCAL.
the
worning
message
Data type
VD : Variable data
The length of
0.0m
media printed
Start printing.
5
• The printing speed may change, depending on
the width of the set media or the position of the
print origin even when the same data is printed.
This is because of a difference in resolution.
Stopping a Printing Operation
Perform the following operation when stopping a printing
operation halfway.
Press the
1
• The printing operation stops.
• Interrupt data sending at the PC side during the
data is sent from the PC.
• Printing restarts from the interrupted data by
repressing the [REMOTE] key.
Deleting Received Data (Data Clear)
When you want to stop printing, delete the already
received data.
Press the
1
(DATA CLEAR) in LOCAL.
Press the
2
• The received data is erased then it returns to the
Local.
(LOCAL) during printing.
key, and press the
key.
Advertisement
Table of Contents
