Table of Contents
Advertisement
Recording Video and Audio to an External Hard
Disk
Formatting an External Hard Disk
172
Recording Video and Audio to an External Hard Disk
Using the i.LINK connector (HDD) on an SD video interface module (BKAW-
570) or serial digital interface module (BKAW-580), you can record to an
external hard disk the program outputs from the unit and all the input sources to
the unit.
i.LINK connector (HDD): connect an external hard disk to record each input
material (video + audio) (page 178) and record program output (video +
audio) (page 177). Perform recording operations on this unit.
You can also simultaneously record program output and each input material
(ON LINE recording) (page 177).
Caution
When recording on the external hard disk, be sure to read the section, "External
Hard Disk" (page 12).
Format an external hard disk in order to use it with this unit.
This unit uses the ext3 file system format.
Note
We recommend that you reformat the external hard disk at regular intervals in
order to avoid a drop in performance due to file fragmentation.
1
Connect the external hard disk to the i.LINK connector (6-pin) of the
interface module.
Caution
Be sure to connect the external hard disk before powering on this unit.
i.LINK connector (6-pin)
S VIDEO COMPOSITE
I.LINK
S400
2
Power on the external hard disk.
3
Press the 1 (power) button on the side panel to start up this unit.
The operation screen appears.
4
Press the MENU button.
5
In the top menu, select [File Manager].
S VIDEO COMPOSITE
SD
OFF
ON
OFF
ON
SD
Advertisement
Table of Contents
