Table of Contents
Advertisement
Monitoring Audio
Determining the Audio Signal Output Destinations
Output from the PGM output connectors
Output from the AUX output connectors
208
Monitoring Audio
Use the internal speakers or the connected headphones to monitor the audio input
to the unit or the audio output from the unit.
Select which output destinations to which the audio assigned for each channel
fader should be routed. For the output destination, you can select the PGM output
connectors, AUX output connectors, or MIX output connectors.
1
Press the ACCESS button in the same column of the channel fader to which
the audio you want to be the program output is assigned.
2
In the top menu, select [PGM OUT], and confirm.
The setting turns on or off each time it is selected.
Limiter/Compressor
Off
Pan
CNT
PGM OUT
On
AUX1 OUT
Off
AUX2 OUT
Off
3
Press the ESC button to close the ACCESS menu.
Note
You can also close the menu by pressing the same ACCESS button again.
This unit has two sets of AUX output connectors (AUX1, AUX2), and you can
create a mix balance with levels different from those of the PGM/MIX output.
1
Press the ACCESS button in the same column of the channel fader to which
the audio you want to be the AUX output is assigned.
2
1 In the top menu, select [AUX1 OUT] or [AUX2 OUT]; 2 in the
submenu, select [Pre-Fader] or [Post-Fader], and confirm.
1
Pan
CNT
Off
PGM OUT
On
Pre-Fader
AUX1 OUT
Off
Post-Fader
AUX2 OUT
Off
Send Level
MIX OUT
On
The functions of the setting items are as follows.
[Pre-Fader]: Outputs the audio before adjustment by the channel faders. In
this case, the audio is output even when the CH ON button is Off.
[Post-Fader]: Outputs the audio after adjustment by the channel faders.
2
0dB
Advertisement
Table of Contents
