Table of Contents
Advertisement
Using the backlight function
Guided item
If the focusing and iris control are set to auto, then "AUTO" appears.
To change the settings manually, see "Setting the Camera Control" (page
163).
2
Following the guide, control the camera, using the front panel buttons and
dials.
5
6
ESC
2
3
MENU
X-Y
REC
SHIFT
JOG/SHUTTLE
You can use the backlight function when [Iris (Exposure)] is set to [Auto] (page
164). When there is a source of light behind the shooting subject and the subject
appears dark, you can brighten the subject's appearance by enabling the backlight
function.
1
Press the NEXT selection button to which the camera video is assigned.
The camera guide menu appears in the menu display.
2
Select [7 Back Light], and confirm.
The setting turns on or off each time it is selected.
Camera control guide
Move the positioner for pan (moving the camera
shooting direction horizontally) and tilt (moving the
camera shooting direction vertically) control.
Hold down the SHIFT button and turn the jog dial to
adjust the iris (aperture). Turning clockwise opens the
iris, and turning counterclockwise stops down the iris
(when setting manually).
Turn the jog dial to adjust the focus. Turning clockwise
focuses further away, and turning counterclockwise
focuses closer (when setting manually).
Turn the shuttle dial to control the zoom. Turning clockwise
zooms in (telephoto), and turning counterclockwise zooms
out (wide angle).
Controlling Cameras
159
Advertisement
Table of Contents
