Connections - Sony AWS-G500 Operating Instructions Manual

Connections

System configuration example 1: When a serial digital interface module is connected
Amplifier (page 64)
Camera with
VISCA support
(page 58)
Camcorder
(page 60)
VCR (page 61)
External hard disk
(page 62)
56 Connections
This section describes how to connect devices for input and output of video and
audio. The following figure shows a sample system configuration and signal
flow. Refer to the pages indicated for details of how to make connections.
In addition, after connecting each device, you must configure settings on the unit
for each input and output signal. See page 66 for details on the settings of each
input and output signal.
Microphone (page 59)
AUDIO IN
MIC/LINE
LINE
VISCA
VIDEO IN (OUT)
SD video
interface module
(BKAW-570)
S VIDEO
COMPOSITE
DV (IN/OUT)
HDD (IN/OUT)
Serial digital
interface module
(BKAW-580)
HDD (IN/OUT)
SDI OUT
SDI IN
PC video
interface module
(BKAW-550)
RGB
Camcorder
(page 60)
Monitor
(page 63)
* Depending on the device, signal
input/output settings may be
required.
Refer also to the manuals provided
with the devices you are connecting.
Anycast Station
AUDIO OUT
VIDEO OUT
PGM
RGB
INTERCOM
Computer (page 59)
Speaker
Plasma display (page 63)
Projector (page 63)
Intercom system (page 206)
Signal flow