Sony AWS-G500 Operating Instructions Manual page 73

1 Source Name
2 Input (L)
3 Input (R)
4 Link to Video
5
6
- If you select CH (1/2) of the HD SDI input connector for either [Input
(L)] or [Input (R)], CH (1) and CH (2) are assigned automatically to
[Input (L)] and [Input (R)], respectively.
When you select CH (3/4) of the HD SDI input connector, CH (3) and
CH (4) are assigned automatically to [Input (L)] and [Input (R)],
respectively.
1 Source Name
2 Input (L)
3 Input (R)
4 Link to Video
5
6
Caution
• For DV input, it is not possible to assign more than one selection button to
a single DV input connector. If you attempt to assign to a different
selection button a DV input connector which has already been assigned to
a selection button, a confirmation message appears. If you then select
[OK], the assignment switches to the new selection button, and the
originally assigned selection button returns to the default setting.
• About the DV signal locking time
When DV is selected for the input audio, there is a delay until the DV
signal locks and the audio can be heard.
• When a serial digital interface module or HD serial digital interface
module is installed
- SDI/HD SDI embedded audio can only be assigned to the channel fader
of the source number assigned to video that is input to the same SDI
input connector or HD SDI input connector. It cannot be combined with
analog input video, DV input video, or video of the other SDI input
connector or HD SDI input connector.
- SDI embedded audio cannot be assigned simultaneously to CH (1/2) and
CH (3/4) of the same SDI input connector or HD SDI input connector.
B MIC/LINE
MIC/LINE 1 MIC/LINE
MIC/LINE 1 MIC/LINE
Off MIC/LINE
MIC/LINE
MIC/LINE
LINE
LINE
SLOT1 DV IN1
SLOT1 DV IN2
SLOT2 HD SDI IN1 CH(1/2)
HD SDI IN1 CH(3/4)
SLOT2 HD SDI IN2 CH(1/2)
HD SDI IN2 CH(3/4)
When installed in slot 2
MIC/LINE
S2 HD SDI IN1 CH1 MIC/LINE
S2 HD SDI IN1 CH2 MIC/LINE
Off MIC/LINE
MIC/LINE
MIC/LINE
LINE
LINE
SLOT1 DV IN1
SLOT1 DV IN2
B SLOT2 HD SDI IN1 CH(1/2)
HD SDI IN1 CH(3/4)
SLOT2 HD SDI IN2 CH(1/2)
HD SDI IN2 CH(3/4)
When CH (1/2) of HD SDI IN1 is assigned
Settings Related To Input Signals
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
73