Table of Contents
Advertisement
Starting EDL creation
Ending EDL creation
4
1 Select [File Name], and confirm; 2 enter the name of the EDL file in the
input box, and confirm.
B Off
PGM Recording
Off
On
Source Recording
File Name
EDL
On
Streaming
Off
DV OUT Recording
Off
5
Press the MENU button to close the menu.
You are now ready to start creating an EDL.
Note
When [Output] for [EDL] is set to [On], the ON LINE icon for VCRS
appears in the PGM viewer.
If you press the ON LINE button, EDL creation starts and subsequent switching
operation information is recorded.
ON LINE button
7
ON LINE
4
0
10
MONI LEVEL
1
DIM
TB
0
Note
You can also activate all of the reserved functions for the ON LINE button
simultaneously. For details, see "Activating Each Function Simultaneously With
the ON LINE Button" (page 266).
1
Press the ON LINE button.
The following confirmation message appears.
2
Press the ENTER button.
Using the Switching Information of the Unit on a Nonlinear Editing System
1
2
[
XXXXXXXXXX
Enter up to 20 alphanumeric characters.
ON LINE icon
8
9
5
6
2
3
]
231
Advertisement
Table of Contents
