Registering Cue-Up Points - Sony AWS-G500 Operating Instructions Manual

Registering Cue-Up Points

STOP button
Stops playback.
Note
If you press the STOP button while holding down the SHIFT button, the
video pauses.
REW button
Rewinds the videotape.
Note
If you press the REW button while holding down the SHIFT button, the
video moves back one frame (and then pauses).
FFWD button
Fast-forwards the videotape.
Note
If you press the FFWD button while holding down the SHIFT button, the
video moves forward one frame (and then pauses).
Shuttle dial
Turning this dial clockwise plays the video in the forward direction speed
corresponding to the amount the dial is turned. Turning this dial
counterclockwise plays the video in the reverse direction speed
corresponding to the amount the dial is turned.
Jog dial
Plays the video at a slow speed that corresponds to the speed at which the dial
is turned.
Notes
• Performance of the preceding functions is not guaranteed on all VCRs.
• Function speeds vary depending on the device.
If you register a position on the videotape to one of the numeric buttons from 1
to 6, you can access that position by simply pressing that numeric button.
1
Press the NEXT selection button to which the VCR to be controlled is
assigned.
2
Play to the position to be cued up, and pause the video (STILL).
Caution
If the video is not in a pause (STILL) state, the cue-up point will not be
registered accurately. Even in pause state, the accuracy of cue-up registration
varies depending on the type of device used.
Controlling VCR Playback From the Unit 199