Table of Contents
Advertisement
Output from the MIX output connectors
Displaying the Audio Signal Output Destinations
Note
In either case, when adjusting with the ACCESS menu, the output includes
these adjustments (excluding pan).
3
After selecting [Pre-Fader] or [Post-Fader] and confirming, 1 select [Send
Level], and confirm; 2 adjust the output level with the slider.
PGM OUT
On
Off
AUX1 OUT
Off
Pre-Fader
AUX2 OUT
Off
Post-Fader
MIX OUT
On
Send Level
Press the ESC button, to close the ACCESS menu.
Caution
The AUX output connectors output the audio of mixing the left and right
audio channels.
1
Press the ACCESS button in the same column as the channel fader to which
the audio you want to be the MIX output is assigned.
2
In the top menu, select [MIX OUT] to set it [On], and confirm.
The setting turns on or off each time it is selected.
AUX1 OUT
Off
AUX2 OUT
Off
MIX OUT
On
3
Press the ESC button to close the ACCESS menu.
Check where the output destinations are set.
1
Press the MENU button.
2
In the top menu, select [Audio Output].
3
Check the output destination display.
The display lights green when set to [On] in the audio signal output
destination settings (page 208).
1
2
0dB
Monitoring Audio
209
Advertisement
Table of Contents
