Table of Contents
Advertisement
234
Using the Switching Information of the Unit on a Nonlinear Editing System
Notes
• Connectivity with all nonlinear editing systems is not guaranteed.
Commercially available software must be installed on the computer for
recognization of the hard disk.
• Information on this function, including the driver software information, can be
found on the following Anycast Station Web portals.
https://servicesplus.us.sony.biz/SoftwarePlusSerch.aspx (for customers in
U.S.A.)
https://www.sonybiz.net/anycast (for customers in Europe, Middle East and
Africa)
https://www.ecspert.sony.biz/ecsite/ (for the other customers)
1
Install a driver software in the computer.
2
Insert the "Memory Stick" or USB flash memory containing the EDL file
into the computer, and connect the external hard disk containing the recorded
materials to the computer.
Note
Make sure that hard disk is mounted as two drives with the volume labels
"system" and "data."
3
Start up the nonlinear editing system.
4
Load the EDL.
5
Perform a media link (reconnection) for each .avi file found in each of the
input materials displayed.
6
Perform editing.
Advertisement
Table of Contents
