Table of Contents
Advertisement
System configuration example 2: When an HD video interface or HD serial digital
interface module is connected
Amplifier (page 64)
Camera with
VISCA support
(page 58)
Camcorder
(page 60)
VCR (page 61)
Microphone (page 59)
AUDIO IN
MIC/LINE
LINE
VISCA
VIDEO IN (OUT)
HD video
interface module
(BKAW-560)
YP
P
IN
B
R
YP
P
IN
B
R
YP
P
OUT
B
R
HD serial digital
interface module
(BKAW-590)
HD SDI IN
HD SDI IN
HD SDI OUT
PC video
interface module
(BKAW-550)
RGB
VCR (page 61)
Camcorder
(page 60)
Caution
• Use the shortest possible cable type (especially with unregulated RGB).
Shorter cables are recommended because, in general, using long cables to
connect devices increases the risk of signal noise. Even when connecting this
unit to another, it is best to use the shortest cables possible.
• Be careful with the connector portions of the interface modules, which may
become hot depending on the conditions of operation.
* Depending on the device, signal
input/output settings may be
required.
Refer also to the manuals provided
with the devices you are connecting.
Anycast Station
AUDIO OUT
VIDEO OUT
PGM
RGB
INTERCOM
Computer (page 59)
Speaker
Plasma display (page 63)
Projector (page 63)
Intercom system (page 206)
Signal flow
Connections
57
Advertisement
Table of Contents
