Showing A Logo On The Screen - Sony AWS-G500 Operating Instructions Manual

Showing a Logo on the Screen

Basic operation for showing a logo
Showing a logo in the video
1
1 Preset
2 Anycast Station Delete
3 Data Name
4
The following confirmation message appears.
Note
By pressing the ENTER button while holding down the SHIFT button, you
can delete all of the presets registered to the numeric buttons 1 to 9
simultaneously.
3
Press the ENTER button.
The preset is deleted, and the number display turns gray.
For copyright protection purposes, you can superimpose a logo (160×120 pixel
graphic) on the video.
When the logo is enabled, the logo is superimposed on the program output video.
The basic procedure for showing a logo is as follows.
Import a logo.
Select the logo source file.
The logo is displayed.
To show a logo, first it is necessary to import the logo file to the internal hard disk
of this unit.
For details on importing a logo file, see "Importing Logo Files" (page 237).
1
Press the MENU button.
2
In the top menu, select [Logo].
2
Video Switching 97