Table of Contents
Advertisement
4
Check that the progress indication has reached 100%, and press the keyboard
ENTER key.
The installation starts.
Installation does not begin if you click the Enter button on the front panel.
Note
In the "STATUS" column, an asterisk (*) blinks while the operating software
is being installed. When installation ends successfully, "Completed" is
displayed, and if installation has failed, "Error" is displayed instead.
Caution
Do not turn the unit off or remove a "Memory Stick" or USB flash memory
from the unit while data is being read or written; otherwise the file may be
destroyed.
When the installation completes, the following message appears.
272
Maintenance
Advertisement
Table of Contents
