Sony AWS-G500 Operating Instructions Manual page 203

Caution
• If the external hard disk is not mounted automatically, mount it manually
using the driver software.
• It may not be possible to mount the external hard disk, depending on its
size. When formatting the external hard disk, select a size that allows
connection to your computer. For details, see "Formatting an External
Hard Disk" (page 172).
3
Copy the AVI files you want to use into the anycast/tmp folder found on the
drive with the volume label "data".
Note
If your external hard disk was formatted on an AWS-G500 with a software
version older than 2.20, connect it to this unit and mount it again.
4
Disconnect the external hard disk from the computer, and connect it to the
i.LINK connector (6-pin) on this unit.
Caution
Be sure to connect the external hard disk before powering on this unit.
i.LINK connector (6-pin)
S VIDEO COMPOSITE
I.LINK
S400
5
Power on the external hard disk.
6
Press the 1 (power) button on the side panel to start up this unit.
The operation screen appears.
7
Press the MENU button.
8
In the top menu, select [File Manager].
9
1 Select [Convert AVI], and confirm; 2 select a hard disk number, and
confirm; 3 select a file, and confirm.
1
Delete HDD1
Disconnect HDD2
Recover HDD3
Rename
Convert AVI
Export EDL Type 1
Export EDL Type 2
Export VOD File
Export Job
Import Job
Import CG File
Import Logo File
Format
Local Disk Remain
S VIDEO COMPOSITE
SD
OFF ON OFF ON
SD
2 3
Full
aaaaaaaaa.avi
bbbbbbbbb.avi
cccccccccc.avi
ddddddddd.avi
Using AVI Files Created on Other Devices 203