Table of Contents
Advertisement
Setting the IP address
1 Select [IP Setting], and confirm; 2 make a selection, and confirm.
1
Apply
Off
Host Name
DHCP
IP Setting
DHCP
Manual
DNS Setting
DHCP
IP Address
MAC Address
Subnet Mask
Default Gateway
[Off]: When not setting an IP address
[DHCP]: When the address is automatically obtained from the DHCP server
[Manual]: When inputting the address manually
When [Manual] is selected, enter the following items, and confirm.
Input the default gateway if required.
[IP Address]: Enter the IP address.
[Subnet Mask]: Enter the subnet mask.
[Default Gateway]: Enter the default gateway address.
Caution
Because the unit uses "172.27.72.0 netmask 255.255.255.0" internally, the
unit will not operate correctly if settings are configured to include
"172.27.72.0 netmask 255.255.255.0."
Making DNS settings
1 Select [DNS Setting], and confirm; 2 make a selection, and confirm.
1
Apply
Off
Host Name
DHCP
IP Setting
DHCP
Manual
DNS Setting
DHCP
Domain Name
MAC Address
Primary DNS
Secondary DNS
[Off]: When not setting an IP address
[DHCP]: When the address is automatically obtained from the DHCP server
[Manual]: When inputting the address manually
When [Manual] is selected, enter the following items, and confirm.
[Domain Name]: Enter the domain name. Enter from 3 to 63 alphanumeric
characters. The first character must be a letter.
[Primary DNS]: Enter the address of the primary DNS server.
[Secondary DNS]: Enter the address of the secondary DNS server (Enter
as required).
5
Select [Apply], and confirm.
A network setting update message appears.
Note
If the network settings are not changed, [Apply] is grayed out, and cannot be
selected.
Displaying the MAC address
Select [MAC Address] to display the MAC address of the internal network
card.
2
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
2
[
. . .
. . .
]
Streaming
249
Advertisement
Table of Contents
