Table of Contents
Advertisement
For picture-in-picture
For keying
1
Perform Steps 1 to 5 of "Basic picture-in-picture operations" (page 86).
2
Press the PVW button.
The PVW button lights orange and a preview of the results of combining
videos is displayed in the PVW viewer.
Check and adjust the results of combining videos and perform the following
operation to execute program output.
For details on making picture-in-picture adjustments, see "Adjusting the
Picture-in-Picture (PinP)" (page 87).
3
Use the AUTO TRANS button, CUT button, or transition lever to combine
the videos.
The results of combining videos are sent as program output and displayed in
the PGM viewer.
The preview in the PVW viewer disappears (changes to the results of the next
transition).
4
Press the PVW button to end PVW mode.
The PVW viewer returns to the video selected with the NEXT selection
button.
1
Press the KEY button.
The KEY button, NEXT selection buttons, and MIX or EFFECT button light
green, and are now used for keying video.
2
Press the NEXT selection button assigned to the video to be combined.
A green border appears around the selected video in the source viewer, and
the video appears in the PVW viewer.
Video Switching
111
Advertisement
Table of Contents
