Table of Contents
Advertisement
Switching with a wipe
82
Video Switching
Current mix state
Notes
• The mix state shows the current transition time setting.
• You can still change the transition time at this point. To make this change,
follow the procedure in "Changing the Transition Time" (page 84).
2
Determine the next program output video, and select this with the NEXT
selection button.
The selected video appears in the PVW viewer.
3
Carry out the transition with the AUTO TRANS button or transition lever.
The NEXT selection video dissolves into the program output video.
Each press of the AUTO TRANS button, or operation of the transition lever,
carries out a dissolve transition from the program output video to the NEXT
selection video.
In a wipe, two video images occupy the display simultaneously, with the area
occupied by one growing until if wipes out the other. You can choose from
sixteen different wipe patterns.
Advertisement
Table of Contents
