Sony AWS-G500 Operating Instructions Manual page 68

68 Settings Related To Input Signals
Notes
When optional modules are installed, the connectors for the optional
modules appear in the list.
• When a serial digital interface module is installed
The SDI input connectors appear.
1 Source Name
2 Input
3 Source Aspect
4 Control
5
6
• When an HD video interface module is installed
The HD analog input connectors appear.
1 Source Name
2 Input
3 Source Aspect
4 Control
5
6
• When an HD serial digital interface module is installed
The HD SDI input connectors appear.
1 Source Name
2 Input
3 Source Aspect
4 Control
5
6
Caution
• You can only use one of the following from the same video input on the
same interface module: Composite (Composite video input connector), S-
Video (S-Video input connector), or DV (DV connector).
• It is not possible to assign more than one selection button to a single video
input connector. If you attempt to assign to a different selection button a
video input connector which has already been assigned to a selection
button, a confirmation message appears. If you then select [OK], the
assignment switches to the new selection button, and the source viewer for
the originally assigned selection button shows the indication "No Input
Assign."
No Assign
S1-1 Composite B SLOT1 IN1 Composite
4:3 S-Video
Off DV
SLOT1 IN2 Composite
S-Video
DV
SLOT2 IN1 SDI
SLOT2 IN2 SDI
SLOT3 IN1 RGB
SLOT3 IN2 RGB
When installed in slot 2
No Assign
S1-1 Composite B SLOT1 IN1 Composite
4:3 S-Video
Off DV
SLOT1 IN2 Composite
S-Video
DV
SLOT2 IN1 HD Analog
SLOT2 IN2 HD Analog
SLOT3 IN1 RGB
SLOT3 IN2 RGB
When installed in slot 2
No Assign
S1-1 Composite B SLOT1 IN1 Composite
4:3 S-Video
Off DV
SLOT1 IN2 Composite
S-Video
DV
SLOT2 IN1 HD SDI
SLOT2 IN2 HD SDI
SLOT3 IN1 RGB
SLOT3 IN2 RGB
When installed in slot 2