Preparations
Installation/Default Settings
Installing the Unit
Connecting the power
This section describes the procedure for installing the unit, connecting the power
cord, starting up the system, and setting the date, time, and video output signal
format.
Install the unit in a level place. The unit weighs about 8 kg (17.7 lbs). Check that
the installation location is strong and spacious enough to accommodate the unit
before installing.
There are ventilation holes on both sides of the unit. To ensure adequate air flow,
there must be a space of at least 300 mm (12 inches) on each side of the unit.
300 mm
(12 inches)
Connect the power cord to the power inlet on the unit and the wall outlet.
2
Chapter
Num
Caps
300 mm
(12 inches)
LINE
8
7
6
AC IN
Installation/Default Settings
MIC/LIN
5
4
45