Table of Contents
Advertisement
Audio Signal Related Settings
Assigning audio input signals to channel faders
4
Press the MENU button to close the menu.
These are preparations for handling audio signals on the unit.
Assign audio signals input from the audio input connectors or signals input from
the interface modules of the rear panel to channel faders 1 to 6.
If you assign different audio signals to the left and right channels (L/R) of the
channel faders, they become stereo faders, and if you assign the same audio
signal to both channels, they become monaural faders.
Caution
If you assign DV signals, SDI signals, or HD SDI signals, they become stereo
faders.
Note
You can confirm assignments and information on input signals using each of the
corresponding ACCESS menus.
1
Press the MENU button.
2
In the top menu, select [Audio Input Assign].
3
Select the channel fader number from the list, and confirm, then set the
following items in the submenu.
Assigning a name
Assign a name to the audio signal. The name assigned here appears in the
source viewer with the same number as the channel fader.
1 Select [Source Name], and confirm; 2 enter the name in the input box,
and confirm.
1
Source Name
2
Input (L)
3
Input (R)
4
Link to Video
5
6
Specifying an audio input connector
Specify the audio signal to be assigned to the channel fader. For stereo audio,
specify the source for each of the left and right channels separately.
For monaural audio, specify the same input for both left and right channels.
1
2
[
]
MIC1
MIC/LINE 1
MIC/LINE 1
Off
Settings Related To Input Signals
Enter up to 20 characters.
* The source viewer can only
display a limited number of
characters.
71
Advertisement
Table of Contents
