Table of Contents
Advertisement
Selecting the connector to use for program output recording
3
Press the 1 (power) button on the side panel to start up this unit.
The operation screen appears, and the source viewer shows the hard disk
number, remaining capacity, and available recording time.
Caution
When recording two sources simultaneously, the indicated remaining
capacity diminishes at twice the normal rate, and therefore the actual
remaining recording time is approximately half of that shown.
1
Press the MENU button.
2
Select [ON LINE Manager] in the top menu.
3
1 Select [PGM Recording], and confirm; 2 select both the external hard
disk to record program output and the input to use for recording, and confirm.
1
PGM Recording
Off
B Off
Source Recording
HDD1
EDL
Off
HDD1
Streaming
Off
HDD2
DV OUT Recording
Off
HDD2
HDD3
HDD3
Note
When the PGM output aspect ratio is set to 16:9 HD, [PGM Recording] does
not appear.
The target hard disk number and ON LINE recording reservation icon appear
in the hard disk status display of the PGM viewer.
Remaining capacity
Available recording time
Hard disk number
2
SLOT1-1
SLOT1-2
SLOT2-1
SLOT2-2
SLOT3-1
SLOT3-2
ON LINE recording reservation icon
Target hard disk drive number
Recording Video and Audio to an External Hard Disk
175
Advertisement
Table of Contents
